MetroScope™ Service Provider Assistant

Základní informace

MetroScope™ asistent poskytovatele služeb

Snadno použitelná zkušební souprava pro RFC 2544 SLA testování propustnosti a hloubkovou IP analýzu Carrier Ethernetových služeb.

Jak se stále více zákazníků obrací k Ethernetu, čelí poskytovatelé služeb novým problémům, ale mají i nové příležitosti. Ethernetová služba se stává zbožím. Jak více poskytovatelů nabízí stejné služby, ceny stále klesají. Nabídkou odlišné služby mohou dodavatelé dosáhnout dodatečných výnosů a udrží si snadněji zákazníky.

Analyzátor MetroScope má zdokonalenou konstrukci, která pomáhá chránit všechny vaše investované prostředky. Jedinečně nízká cena gigabitového LinkReflector — vzdáleného testeru obsaženého v MetroScope soupravě — vám umožní vykonávat kompletní SLA testování propustnosti bez nákupu druhé jednotky. Testujte až sedm spojení za cenu testování jednoho, použitím alternativních řešení.

Zkušební souprava MetroScope je navržená s internetovým dálkovým ovládáním. Technik se může přímo na místě u klienta poradit se vzdálenými experty uvnitř vaší organizace, jak vyřešit složitý problém. Nejen že to ušetří čas a peníze,ale pro technika to znamená, že se dozví více a co je nejdůležitější – zákazníkův problém je vyřešen mnohem rychleji.

Demo

 

Specifikace

General Specifications
Weight,with battery 0.86 kg (1.9 lb)
Dimensions 19.1 x 15.2 x 4.4 cm (7.5 x 6.0 x 1.75 in)
Display LCD touch screen, 640 x 480 pixels, TFT (active) color panel, touch pad
LED indicators 6 (including power LED)
Carrying Case Rugged carrying case with two removable pockets, camcorder strap and adjustable strand hook


Power
Battery Lithium Ion 7.2V DC (nominal), 4.2Ah, removable/rechargeable
Battery life 4 hour typical, 10 hour in standby mode
External AC adapter/battery charger AC input: 90 to 264 V ac, 48 to 62 Hz; 1.5 A
DC output: 15 V dc, 1.2 A (isolated output)
Auto Charger 12V “cigarette lighter” charger with 6 foot (1.8 m) fully extended coiled cord and LED power indication


Ports
Communication and accessory ports 1 USB (supports out-of-band NIC for remote control), 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle
RJ-45 / Copper Port RJ-45 10/100/1000BASE-T Ethernet
Fiber Port Small Form-factor Pluggable (SFP) in accordance with MSA
Supported SFP Modules 1000BASE- LX, SX, ZX, BX, 100BASEFX
SFP Connector Duplex LC


Environmental and safety
Operating Temperature 0° to +50°C (32° to 122°F) with up to 95% relative humidity
Battery Charging 10° to +40°C (50° to 104°F) with up to 95% relative humidity
Temperature
Storage temperature -20° to +60°C (-4° to 140°F)
Shock and vibration Meets requirements of MIL-PRF-28800F for Class 3 equipment
Safety CSA Canada and United States, CE, FCC Part 15 Class A, C-TICK N10140; UL and CSA approvals for universal AC adapter.
EMC Complies with EN61326, Class A, Criteria C


Copper media
Cable types Unshielded twisted pair LAN cables (100 and 120 Ohm UTP)
Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP)
Cable length 1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selected
Length resolution ± [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection = 20%
Receive level 100 to 5000 mVp-p
Datalink signal 500 to 4000 mVp-p
Measuring terminated cables The Cable Verification feature tests the individual twisted-pairs of a cable that are terminated into most equipment vendor's Ethernet ports such as on a hub, switch or NIC. All cable tests other than WireView wire map and office locator ID are operational in the presence of datalink signal.
Wiremapper/office locator compatibility Detects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wire map adapter/office locator.
Fault tolerance The RJ-45 Ethernet connection on the analyzer is designed to withstand a maximum of 100 volts.


Fiber optic power measurements
Receive Input Power, Transmit Output Power, Temperature, Voltage, TX Bias Current Real time access to digital diagnostic monitoring of SFP operating parameters in accordance with the SFP Multi Source Agreement (MSA) and SFF-8472.


ProVision™ Tests
Compatible remote devices MetroScope, LinkReflector, EtherScope, Physical Loopback, 802.3ah Devices
Test Configuration Each test may be made up of an unlimited number of suites which run sequentially. Each suite may measure a maximum of eight streams total (including upstream and downstream) from one to four MetroScope units or a maximum of four streams (roundtrip) from one to four reflectors.
Test Duration Each suite can run for any length of time from 1s to 24h. Suites may be run sequentially for virtually unlimited test lengths.
Tests Throughput, Latency, Jitter, Loss/BERT, measured in parallel
Application port User defined, per stream
Frame content All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte, HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
Frame size 48, 64, 128, 256, 512, 1024, 1280, 1518, 2024, RFC-2544 sweep, Jumbo sweep, or user-defined including baby jumbo sizes up to 2024
Rate (bps) Up to 1000 MBps (selectable per stream)
802.1Q settings VLAN Id, QoS with CoS and ToS , QinQ VLAN Id, priority for each individual stream or all streams. Programmable TPID, DEI, CFI and VID for all streams.
IP TOS settings IP Precedence/TOS parameter, DiffServe Code Point
Pass/Fail Limits Throughput (separate upstream and downstream), Latency, Jitter, Loss/BERT
Summary Display Summary matrix of all streams and all measurements; IP/Mac addresses, VLANPriority/TOS, status,Tx and Rx rates in bps and fps, frames sent and lost, loss ratio, errored intervals; current, average, maximum latency and jitter.
Detailed Display Individual measurements may be shown in tabular (by frame size), graphical (by frame size) or trending (by current interfal or total test duration for all frame sizes).
Frame Loss Statistics Total, current, and maximum for: frames sent and lost, loss ratio, BER, errored intervals, severely errored intervals
Data Export Throughput, Frames Sent/Received, Loss, Delay and Jitter test results for each stream are time stamped and saved to the CD card once per measurement interval for the duration of the test.


RFC 2544 Tests
Compatible remote devices MetroScope, LinkReflector, EtherScope Layer 1 Loopback, 802.3ah Devices
RFC-2544 Compliant Tests Throughput, Latency, Frame Loss, Back-to-Back
Additional Performance Tests Jitter, FrameBERT
Frame content All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte , HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
Frame size 48, 64, 128, 256, 512, 1024, 1280, 1518, RFC-2544 sweep, Jumbo sweep, or user-defined including baby jumbo sizes up to 2024
Application port User defined
Rate (bps) Up to 1000 Mbps
802.1Q settings VLAN Id, priority
IP TOS settings IP Precedence/TOS parameter, DiffServe Code Point
Throughput settings Duration, maximum rate, measurement accuracy, pass/fail limits
Latency settings Duration, rate, iterations, pass/fail limits
Frame loss settings Duration, rate, step size, pass/fail limits
Frame loss settings Duration, rate, step size, pass fail
Back to Back settings Min and Max duration, rate, iterations, pass/fail
Jitter Settings Duration, rate, pass/fail
FrameBERT Settings Duration, rate, pass/fail


Traffic generator
Traffic type Broadcast, multicast or unicast
Frame type Benign Ethernet, Benign LLC, NetBEUI, Benign IP, IP/ICMP Echo, IP/UDP Echo, IP/UDP Discard, IP/UDP Chargen, IP/UDP NFS, IP/UDP NetBIOS , Layer 1/2/3 BERT
Frame size 48 , 2024 bytes (48,2024)
Rate Utilization (%): 0.1 – 100, Frames/second: 1 – 1488095
Duration Seconds: 1 – continuous, Frames: 1 – continuous
FCS Error Generates any frame setting with an FCS error
Background mode May be run concurrent with all other MetroScope tests excluding ProVision and RFC 2544 tests.


802.3ah Client
Functions Remote device discovery, loop-up with 1s keep-alive, loop down. May be run in background while other MS functions are active.
Display Loopback capability of remote, OAM status OAM mode link status, maximum OAM size, remote state


IPTV Tests
Configuration Multicast Group IP, Port Number, join, leave, RTSP URL, setup, play, pause, teardown
Results IGMP Latency, Total Packets Sent, Connected Time, Received Packet Rate, RFC-4445 MDI Delay Factor and Media Loss Rate for MPEG-2 streams


Service Performance Tool
Category of devices tested DHCP Servers, DNS Servers, E-mail Servers (SMTP, POP3), NT File Servers, Web Servers, WINS Servers, User-Defined Servers
Test controls Iterations, interval
Add device by IP address or host name (except Web Server where URL added)
DHCP Server pass/fail criteria Ping response time, server response time
DHCP Server BOOTP parameters (optional) Subnet mask, domain server, WINS server, NetBIOS scope, POP3 server, router/default gateway, client DNS domain, NetBIOS node type, SMTP server, web server
DNS Server pass/fail criteria Ping response time, server response time
E-mail Server pass/fail criteria Ping response time, SMTP SYN/ACK response time, SMTP response time, POP3 SYN/ACK response time, POP3 response time
E-mail Server operation modes Connect only, log in only, send/receive
NT File Server pass/fail criteria Ping response time, SYN/ACK response time, connect time
NT File Server operation modes Server response, read, write/read/delete
Web Servers pass/fail criteria Web Server name lookup time, ping response time, SYN/ACK response time, first reply time, receive time, receive rate
WINS Servers pass/fail criteria Ping response time, server response time
User-Defined Servers pass/fail criteria Ping response time, SYN/ACK response time
Results format Tabular, graphical, xml-based report


Wireless LAN Adapter Option
Specification compliance IEEE 802.11a, 11b, 11g
Certifications FCC part 15, Telec, CTICK, ETSI, EN301893, EN60950
Interoperability WECA Compliant
Interface 32-bit Cardbus
Outdoor operating range Up to 515 m (1690 ft)
Indoor operating range Up to 85 m (279 ft)
Data rate 802.11a: up to 54 Mbps, 802.11b: up to 11 Mbps, 802.11g: up to 54 Mbps
Output power 18 dBm peak power
Infrastructure mode BSS
External antenna connector jack Hirose MS-147


Wireless LAN Directional Antenna
Frequency range 2.4 – 2.5 and 4.9 - 5.9 GHz
Minimum gain 5.0 dBi in the 2.4 GHz band and 7.0 dBi in the 5 GHz band
External antenna connector plug Hirose MS-147


VoIP Phone Option
Calling Modes SIP Call Manager, Direct IP Address
Address Book Stores complete settings for up to 99 destinations
WAV File Output Play 1-30 times or continuous
Settings Call Manager Registration (Username, Password, Registrar, Proxy); NAT (Server); RTP (Codec and Port); Answer Control (Auto, Wave File, Do Not Disturb);
Call Log ASCII log of all major call events
Measured Results Total, current, maximum and minimum for: Frames Received and Dropped, MOS, R-Factor, Latency
Trend Graphs MOS, R-Factor, Latency Graph with user-selectable update interval of 5s, 10s, 1 min, 10 min, 1 hour


LinkReflector specifications
Weight 10 oz (311 grams) with batteries installed
Dimensions 5.3” h x 3.1” w x 1.3” d (13.46 cm x 7.87 cm x 3.30 cm)
Operating Temperature 10° to +40°C (50° to 104°F) with up to 95% relative humidity
Media Access 10BASE-T, 100BASE-TX, 1000BASE-T (IEEE 802.3), and PoE (IEEE 802.3af)
Operating Modes Reflect All, Reflect Targeted MAC, Reflect Targeted IP, Reflect Fluke Networks Test Traffic, Reflect Non-Broadcast, Non-Reflecting (Troubleshooting Mode)
Address Setting Manual or DHCP


LinkReflector Troubleshooting Mode
Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID
Tone Generator IntelliTone digital tone: [500 KHz]; analog tones: [400Hz, 1KHz]
Ping Automatically pings default router and DNS server; can be configured to ping up to 10 additional devices.
802.1x Discovers and gains authentication to 802.1x networks.
PoE Detection Detects and identifies PoE type.
Port Verification Displays make, model, address, slot, and port of the nearest LLDP device
User Interface (UI) Display: black and white, 2” x 1” display, link LED; control: five push-buttons for selection of icons and navigation of menus; power: on/off button
Ports Test ports: RJ45 ports (2): network test port, loop-back wire map port; Application port: mini-USB, Kensington lock receptacle
Power Source 4 AA batteries or optional Li-ion Battery Pack with AC Charger